YRT Standard Series

The thrust – centripetal combination structure can bear bidirectional axial load, radial load and overturning moment simultaneously.

Installation: the bearing is uniformly distributed with mounting holes, which can be fixed directly on the bearing by bolts;The bearing has been pre-loaded when leaving the factory, and there is no need to adjust clearance for installation.

YRTM  bi-directional thrust cylindrical roller composite bearings with Angle measuring system

This series of bearings are based on YTR turntable bearings, and the Angle measurement system is installed on YRT turntable bearings to accurately measure and adjust the Angle of bearing rotation and ensure the high-precision operation of the machine.The measuring system consists of a sensor component and a measuring ruler.Using pure inductance measurement principle, the signal is extremely accurate, high measurement accuracy.At the same time, due to the use of high precautionary measures, the measuring system in operation will not be affected by external interference, such as dust and smoke, light oil and scratches, magnetic field, etc., reliable work, without too much maintenance, a wide range of applications.

Scope of application: YRT turntable bearing series is suitable for low speed, short running cycle, high rigidity and precision requirements, such as rotary table, indexing and so on.

Scope of application: It can be used in high precision rotary table and rotating shaft, dividing head, military radar, aviation, aerospace and measurement and test in the field requiring high precision of Angle rotation.

ZKLDF thrust angular contact ball series

ZKLDF thrust angular contact ball series, can also bear combined load, but has very high speed and very low friction torque, and at the same time can ensure very high rotation accuracy.Ideal for applications where such requirements are required.

YRTS high speed turntable bearing series

The size of the external structure is the same as that of YRT series, but the internal structure is different from that of YRT series, which determines that the ultimate speed of YRT turntable bearing series is higher than that of YRT series, and the friction torque is lower and uniform than that of YRT turntable bearing series. Therefore, for the occasions requiring relatively low friction but relatively high speed, this series can be selected.

Scope of application: e.g. bearings for shafts driven by direct drive motors.

Application: such as high speed rotary table, milling, grinding, and precision measurement, measuring equipment, etc.

If you have any questions,pls feel free to contract us.