1. Disassembly skills of bearing seat ring

Some mechanical equipment is prone to connecting rod bearing damage, and after bearing damage, the outer ring is still retained in the connecting rod hole, it is difficult to disassemble, because all the steel of the outer ring is relatively hard, so the hacksaw is easy to slip when sawing, but too hard knocking will cause damage to the connecting rod. At this point, the connecting rod can be fixed on the bench, through the heavy-duty socket wrench socket head, use the side of the socket head slightly larger than the size of the connecting rod bearing hole against the connecting rod hole, and use the side of the socket head slightly smaller than the size of the connecting rod bearing hole against the bearing outer ring, and then appropriately increase the clamping force, slowly press the bearing outer ring out.

2. Problems of bearings themselves

When repairing mechanical equipment, maintenance personnel should fully master the code name and model information of corresponding bearings, and avoid replacing the original bearings with other types of bearings. At present, the market can buy large quality difference between bearings, and were higher in the sham as the genuine and shoddy, even some of the bearing can occur due to the storage time is too long low quality or performance, therefore, to the bearing maintenance of mechanical equipment, replace new bearing before, need to bearing the full and accurate information related to verification, Test its performance and appearance to improve the quality of bearings.

3, avoid by all means reverse loading

In the process of mechanical equipment maintenance, it is necessary to accurately grasp the direction requirements of mechanical bearings, and only the correct installation can provide guarantee for its work and operation. Because the external characteristics of some mechanical bearings are not very obvious, they can be installed in any direction, so the problem of reverse installation often occurs. Therefore, when assembling bearings, maintenance personnel need to fully understand and accurately grasp the installation and structure requirements of bearings, and fully understand the relevant provisions of the manual to ensure the accuracy and efficiency of bearing maintenance work.

If you have any questions,pls feel free to contact me.

email:bearing6@hyzcgroup.com