Belt drives are generally divided into parallel belt drives, v-belt drives and synchronous toothed belt drives. Belt drive installation requirements and use 1. When installing the transmission belt, the belt should be set up only after reducing the distance between the two wheels, and should not be pried hard to avoid damage to the belt to reduce service life. 2. When installing the belt wheel, the two wheel axes must be parallel; the center line of the wheel groove must also be right, otherwise it will cause premature wear on the working side of the v-belt. 3. When selecting the belt, the type and nominal length must not be wrong, in order to ensure the correct position of the v-belt section in the slot again. 4. The same transmission in the number of v-belt root more, can not use the old and new different, different length of the belt, to avoid uneven distribution of load, accelerate the wear and tear of the belt. 5. strictly prevent the tape and mineral oil, acid, alkali and other media contact, so as not to deteriorate. Also should not be exposed to the sun. 6. In order to ensure the safety of operation, the belt drive must be stopped up with a protective cover.

We have rich experience on precision bearing manufacturing and are ranked NO.1 in China and NO.3 all over the world.

We can tailor the overall solution for the use of precision bearings.

HON B- Accountability & Innovation