Cylindrical roller bearing lubrication precautions 1.Never mix the grease that can’t be compatible, if two incompatible grease mix, usually the consistency will become soft, and finally because the grease is easy to lose and cause damage. 2.Oil seal is the portal containing grease and cylindrical roller bearings from external pollution, many cylindrical roller bearings in industry only use ball cage, some use metal oil seal system, some because of automatic oiling system, and present completely open state, and bicycle usually can not use such cylindrical roller bearings, otherwise only after the first cycle of grease depletion or pollution, that is declared the end of life, and Cylindrical roller bearings with metal oil seals can also avoid contamination for a longer period of time though, and can act as an oil containment. 3. Grease will become soft when rotating at high speed, resulting in leakage, when there is vibration, grease will be extruded from the raceway, and the soap structure of grease will produce mechanical disintegration so that grease is destroyed, and even thrown out of the cylindrical roller bearing. 4. used in cylindrical roller bearings within the grease have anti-rust, anti-rust performance is good or bad mainly depends on the grease solubility, different viscosity and different materials formed grease, with different levels of anti-soluble and anti-rust performance, in general, the viscosity and poor grease solubility grease waterproof better, such grease even in the Perlin cavity is filled with water, but also in the steel surface to form a layer can resist the oil film.

We have rich experience on precision bearing manufacturing and are ranked NO.1 in China and NO.3 all over the world.

We can tailor the overall solution for the use of precision bearings.

HONB– Accountability & Innovation